Your pipe diameter tape measure is probably the most valuable and simplest tool in your toolbox. It will tell you the outside diameter of a pipeline (or your arm) when you wrap it around the circumference. What if you lost your pipe tape? How would you measure the diameter of a pipe or any round object?
- Use a regular tape measure, if it is flexible enough to wrap around the pipe. A carpenter’s tape is made to stay stiff, so it won’t work in this case. Since the end hook won’t let you lay the zero mark against the pipe, you would have to start at the 1 or 2 inch mark. Read the circumference and divide by 3.14159. That’s a lot of trouble.
- Use an expensive caliper, transfer the reading to a measuring tape, perhaps, then divide by pi. That’s a clumsy way of doing it.
- Get a real expensive micrometer. Since they have a narrow range of measuring (1 inch), it would have to be a certain size to begin with. Then measure the diameter directly. Reading the markings on a micrometer is not the easiest thing to do. You have to read the shaft measurement, then add the tumbler measurement to it.
So, hang on to your pipe diameter tape measure and it will save you a lot of trouble.